Custom Sliders for My Player, No CPU Trades

Talk about NBA 2K12 here.

Re: Custom Sliders for My Player, No CPU Trades

Postby instant000 on Sun Oct 23, 2011 4:19 am

CSLN wrote:TY for this one! I was wondering since in 2k11 you could tweak the SP's through Cheatengine, if this is possible with the salary of your "My Player".


My Player Money: (Not salary, your bank account)
Address: 132006C
Bytes: 4


My Player Skill Points:
Address: 1C47A84
Bytes: 4
I came, I saw, but I did not conquer.
instant000
 
Posts: 56
Joined: Tue Jul 19, 2005 1:21 am

Re: Custom Sliders for My Player, No CPU Trades

Postby LuisSalgado on Sun Oct 23, 2011 5:16 am

how use the CPU trase option??
LuisSalgado
 
Posts: 8
Joined: Sun Oct 23, 2011 4:58 am

Re: Custom Sliders for My Player, No CPU Trades

Postby burter on Sun Oct 23, 2011 6:17 am

Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun :)

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.
burter
 
Posts: 76
Joined: Mon Apr 05, 2010 5:42 am

Re: Custom Sliders for My Player, No CPU Trades

Postby Rob Owen on Sun Oct 23, 2011 9:40 am

Nice find burter, anyway i got a question what is the type of address is it 4 bytes?
User avatar
Rob Owen
 
Posts: 260
Joined: Fri Apr 16, 2010 4:34 am
Location: Somewhere in the middle.

Re: Custom Sliders for My Player, No CPU Trades

Postby burter on Sun Oct 23, 2011 9:59 am

Yep its' 4 byte :).
burter
 
Posts: 76
Joined: Mon Apr 05, 2010 5:42 am

Re: Custom Sliders for My Player, No CPU Trades

Postby Rob Owen on Sun Oct 23, 2011 11:16 am

too bad it didn't work for me :(
User avatar
Rob Owen
 
Posts: 260
Joined: Fri Apr 16, 2010 4:34 am
Location: Somewhere in the middle.

Re: Custom Sliders for My Player, No CPU Trades

Postby burter on Sun Oct 23, 2011 1:29 pm

Anthoknicks wrote:too bad it didn't work for me :(


It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.
burter
 
Posts: 76
Joined: Mon Apr 05, 2010 5:42 am

Re: Custom Sliders for My Player, No CPU Trades

Postby Rob Owen on Sun Oct 23, 2011 2:10 pm

burter wrote:
Anthoknicks wrote:too bad it didn't work for me :(


It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.


I tried it before creating a New Player in MP then i open the address you have given in Cheat Engine then i change it to 0 cause i want to be drafted as a no.1 overall in the draft but too bad i still drafted 12 overall then i repeat the same process i end up 20 Overall in the draft cause i intentionally fouling.
User avatar
Rob Owen
 
Posts: 260
Joined: Fri Apr 16, 2010 4:34 am
Location: Somewhere in the middle.

Re: Custom Sliders for My Player, No CPU Trades

Postby Karmar on Sun Oct 23, 2011 3:59 pm

Epic find and yeah it worked for me

I finally completed the Heat now with a decent PG
Karmar
 
Posts: 12
Joined: Mon Oct 10, 2011 10:20 am

Re: Custom Sliders for My Player, No CPU Trades

Postby _Steve_ on Sun Oct 23, 2011 8:46 pm

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?
“Get your facts first, then you can distort them as you please.” - Mark Twain
User avatar
_Steve_
 
Posts: 1652
Joined: Fri Jan 08, 2010 9:09 pm
Location: Hannover, Germany

Re: Custom Sliders for My Player, No CPU Trades

Postby burter on Sun Oct 23, 2011 9:20 pm

Anthoknicks wrote:
burter wrote:
Anthoknicks wrote:too bad it didn't work for me :(


It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.


I tried it before creating a New Player in MP then i open the address you have given in Cheat Engine then i change it to 0 cause i want to be drafted as a no.1 overall in the draft but too bad i still drafted 12 overall then i repeat the same process i end up 20 Overall in the draft cause i intentionally fouling.


Not sure man. You have a Zero and not a Circle for the first number in the address right? 0116a14c. I did test out trying to be drafted number 1, it looks like you can't. If you leave the value at 0 it won't take it, so looks like you can only be drafted 2nd and later.
burter
 
Posts: 76
Joined: Mon Apr 05, 2010 5:42 am

Re: Custom Sliders for My Player, No CPU Trades

Postby erudain on Sun Oct 23, 2011 11:35 pm

It worked awesome :D

Thx u thx u thx U!!!!!!
User avatar
erudain
 
Posts: 167
Joined: Sun Oct 09, 2011 11:24 pm

Re: Custom Sliders for My Player, No CPU Trades

Postby eziquiel on Mon Oct 24, 2011 2:39 am

SteveHTOWN wrote:I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.
eziquiel
 
Posts: 79
Joined: Fri Oct 07, 2011 10:17 pm

Re: Custom Sliders for My Player, No CPU Trades

Postby Nightfly67 on Mon Oct 24, 2011 3:18 am

burter wrote:Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun :)

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.

Worked like a charm for me! The screen turned black right before the draft for quite some time until the contract screen showed up and the Hawks drafted me (They drafted 48th, so I ented 47). When I look at my MyPlayer card, it says I've been drafted 17th overall in the first round by the Hawks so I think it takes the pick away from a team in the first round.
Nightfly67
 
Posts: 470
Joined: Sun Oct 09, 2011 9:10 am
Location: The Netherlands

Re: Custom Sliders for My Player, No CPU Trades

Postby Rob Owen on Mon Oct 24, 2011 3:33 am

Ok finally nailed it too thanks..
User avatar
Rob Owen
 
Posts: 260
Joined: Fri Apr 16, 2010 4:34 am
Location: Somewhere in the middle.

Re: Custom Sliders for My Player, No CPU Trades

Postby instant000 on Mon Oct 24, 2011 6:46 am

I can't get the draft position one working.

I have the value frozen, even before starting my player, but it still didn't click. Not sure what's going on.

Even when Stern drafted me, he said "with the 11th pick" even though I was drafted 19th :(

What gives?

And, when I watch the draft, they say what teams are getting what, but they all show up under the Cleveland Cavaliers on screen, did anyone else get this?
I came, I saw, but I did not conquer.
instant000
 
Posts: 56
Joined: Tue Jul 19, 2005 1:21 am

Re: Custom Sliders for My Player, No CPU Trades

Postby instant000 on Mon Oct 24, 2011 8:19 am

burter wrote:
Not sure man. You have a Zero and not a Circle for the first number in the address right? 0116a14c. I did test out trying to be drafted number 1, it looks like you can't. If you leave the value at 0 it won't take it, so looks like you can only be drafted 2nd and later.


OK, I didn't read this.

After changing it to other than trying to be number 1, it worked. :D
I came, I saw, but I did not conquer.
instant000
 
Posts: 56
Joined: Tue Jul 19, 2005 1:21 am

Re: Custom Sliders for My Player, No CPU Trades

Postby theredsuns on Mon Oct 24, 2011 8:46 am

Found some addresses I thought some of you might enjoy using. By using these and setting them to 95, you aren't limited to a lower maximum skill cap for being a point guard. After buying the 5 point skill cap increases, you can max any and/or every single attribute as a point guard.

Standing Dunk Maximum - 0132007C
Defensive Clutch Maximum - 01320084
Defensive Low Post Maximum - 01320085
Block Maximum - 01320086
Offensive Rebounding Maximum - 0132008D
Defensive Rebounding Maximum - 0132008E
Strength Maximum - 01320096
theredsuns
 
Posts: 1
Joined: Sun Oct 23, 2011 12:35 pm

Re: Custom Sliders for My Player, No CPU Trades

Postby _Steve_ on Mon Oct 24, 2011 5:58 pm

eziquiel wrote:
SteveHTOWN wrote:I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.


I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...
“Get your facts first, then you can distort them as you please.” - Mark Twain
User avatar
_Steve_
 
Posts: 1652
Joined: Fri Jan 08, 2010 9:09 pm
Location: Hannover, Germany

Re: Custom Sliders for My Player, No CPU Trades

Postby Push on Mon Oct 24, 2011 7:45 pm

Anyone knows the code for Muscle Tone?
User avatar
Push
 
Posts: 176
Joined: Tue Oct 11, 2011 4:23 pm
Location: Pilipinas

Re: Custom Sliders for My Player, No CPU Trades

Postby Nightfly67 on Tue Oct 25, 2011 3:27 am

SteveHTOWN wrote:
eziquiel wrote:
SteveHTOWN wrote:I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.


I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...

Do you play every game or do you only play the key games?
Nightfly67
 
Posts: 470
Joined: Sun Oct 09, 2011 9:10 am
Location: The Netherlands

Re: Custom Sliders for My Player, No CPU Trades

Postby _Steve_ on Tue Oct 25, 2011 4:37 am

Nightfly67 wrote:
SteveHTOWN wrote:
eziquiel wrote:
SteveHTOWN wrote:I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.


I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...

Do you play every game or do you only play the key games?

Played every game so far. Had some success concerning the trades. I enabled CPU trades via tsearch (again), saved and reloaded my game and finally one trade happened.
“Get your facts first, then you can distort them as you please.” - Mark Twain
User avatar
_Steve_
 
Posts: 1652
Joined: Fri Jan 08, 2010 9:09 pm
Location: Hannover, Germany

Re: Custom Sliders for My Player, No CPU Trades

Postby anastasis16 on Tue Oct 25, 2011 2:45 pm

burter wrote:Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun :)

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.


thank u so much bro, now I can go to TD Garden easily :mrgreen: :mrgreen: :mrgreen:
Image
User avatar
anastasis16
 
Posts: 603
Joined: Wed Nov 17, 2010 11:28 pm
Location: Soerabaja, Indonesia

Re: Custom Sliders for My Player, No CPU Trades

Postby iamjorgan on Tue Oct 25, 2011 7:42 pm

Any chance someone can track down the rules addresses? Namely 3 in the paint and goaltending. I tried locking them down myself but seem to have no luck when trying to find them
iamjorgan
 
Posts: 2
Joined: Sun Oct 09, 2011 3:23 am

Re: Custom Sliders for My Player, No CPU Trades

Postby gamecat on Tue Oct 25, 2011 11:17 pm

This was posted over in the 2K forums:
Decoy143 wrote:Yup - been playing with the Tsearch engine for a bit and found several attributes related to gameplay, tendencies and such. I also discovered the numerical binaries associated with them. Here's what I have so far:

- Discovered a binary associated with the AI catch up logic or 'Rubberbanding AI' as some like to call it. Currently, the game defaults to percentages of 7%, 13%, 22% and 17% under a progression line (also notice it only takes prme numbers. Adding a non prime number causes the game to crash / freeze). Each number represent the quarters being played and the tangible change of the AI catching up. By looking at the line, you can see that by the 2nd half or 3rd quarter, the AI boost up all its bahaviors and tendencies from 7% - 22% (hence the term Progression). What's strange is that there is a STOP modifier associated with it, but for whatever reason(s) 2k / VC left it blank. Right now, I have to ALT Tab to force it to stop at 22%. The good news, is they can fix for 2k if they choose to correct / revise this.

There's no doubt the game handicaps you from the get-go. It was definitely intended to provide a challenge, but somehow it managed to become a frustratingly annoying issue as well.


Does anyone have the offsets used to control the "rubberbanding?"
gamecat
 
Posts: 1
Joined: Wed Oct 19, 2011 2:19 am

PreviousNext

Return to NBA 2K12

Who is online

Users browsing this forum: No registered users and 1 guest