Custom Sliders for My Player, No CPU Trades

TY for this one! I was wondering since in 2k11 you could tweak the SP's through Cheatengine, if this is possible with the salary of your "My Player".

My Player Money: (Not salary, your bank account)
Address: 132006C
Bytes: 4


My Player Skill Points:
Address: 1C47A84
Bytes: 4

how use the CPU trase option??

Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.

Nice find burter, anyway i got a question what is the type of address is it 4 bytes?

Yep its' 4 byte .

too bad it didn't work for me

too bad it didn't work for me

It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.

too bad it didn't work for me

It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.

I tried it before creating a New Player in MP then i open the address you have given in Cheat Engine then i change it to 0 cause i want to be drafted as a no.1 overall in the draft but too bad i still drafted 12 overall then i repeat the same process i end up 20 Overall in the draft cause i intentionally fouling.

Epic find and yeah it worked for me

I finally completed the Heat now with a decent PG

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

too bad it didn't work for me

It's for Cheat Engine not sure if it changes with tsearch but I don't think it does. You have to freeze it before you start MP mode. If you try to do it while the draft is going on, it won't take.

I tried it before creating a New Player in MP then i open the address you have given in Cheat Engine then i change it to 0 cause i want to be drafted as a no.1 overall in the draft but too bad i still drafted 12 overall then i repeat the same process i end up 20 Overall in the draft cause i intentionally fouling.

Not sure man. You have a Zero and not a Circle for the first number in the address right? 0116a14c. I did test out trying to be drafted number 1, it looks like you can't. If you leave the value at 0 it won't take it, so looks like you can only be drafted 2nd and later.

It worked awesome

Thx u thx u thx U!!!!!!

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.

Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.

Worked like a charm for me! The screen turned black right before the draft for quite some time until the contract screen showed up and the Hawks drafted me (They drafted 48th, so I ented 47). When I look at my MyPlayer card, it says I've been drafted 17th overall in the first round by the Hawks so I think it takes the pick away from a team in the first round.

Ok finally nailed it too thanks..

I can't get the draft position one working.

I have the value frozen, even before starting my player, but it still didn't click. Not sure what's going on.

Even when Stern drafted me, he said "with the 11th pick" even though I was drafted 19th

What gives?

And, when I watch the draft, they say what teams are getting what, but they all show up under the Cleveland Cavaliers on screen, did anyone else get this?

Not sure man. You have a Zero and not a Circle for the first number in the address right? 0116a14c. I did test out trying to be drafted number 1, it looks like you can't. If you leave the value at 0 it won't take it, so looks like you can only be drafted 2nd and later.

OK, I didn't read this.

After changing it to other than trying to be number 1, it worked.

Found some addresses I thought some of you might enjoy using. By using these and setting them to 95, you aren't limited to a lower maximum skill cap for being a point guard. After buying the 5 point skill cap increases, you can max any and/or every single attribute as a point guard.

Standing Dunk Maximum - 0132007C
Defensive Clutch Maximum - 01320084
Defensive Low Post Maximum - 01320085
Block Maximum - 01320086
Offensive Rebounding Maximum - 0132008D
Defensive Rebounding Maximum - 0132008E
Strength Maximum - 01320096

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.

I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...

Anyone knows the code for Muscle Tone?

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.

I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...

Do you play every game or do you only play the key games?

I have one problem. I turned CPU trades off, which worked well as CPU only works on existing contracts. I decided to turn it on for a while (5 games ago) but nothing happened. I checked it via that Chinese trainer and it's set to trade override "off"/ allow CPU trades "on" but any CPU trades happened so far. Any suggestions?

Yeah, learn to use TSearch instead of a crappy trainer in a foreign language:)

It works perfectly fine to turn it back on.

Obviously, you turning it on doesn't mean teams are going to instantly start to trade.

I use cheat engine or tsearch (both works well for me). I just used the trainer to check whether the settings are on or off. Even with allow trades set to "1" which should be "yes" nothing happend after 11 games in that season, despite some contract extensions. No player was sent to D-league, waived or traded. I wouldn't complain if there weren't plenty of trades after just two games in my first MP campaign. Do I have to freeze the value or what do I exactly have to do?
I usually start tsearch, load the cheat table (did the same with cheat engine) and changed the value. Afterwards I saved the game and quit the mod. I then loaded the game again and played the next game or two games. Still nothing happened despite there are plenty of trade rumors...

Do you play every game or do you only play the key games?

Played every game so far. Had some success concerning the trades. I enabled CPU trades via tsearch (again), saved and reloaded my game and finally one trade happened.

Does anyone have address for draft order?

Edit: Hahaha I just found it I believe. I'm going to test it again. Anyways I got 0116a14c. I froze it before i started up MP mode. I did the pre-draft mess and when it came to David Stern it was a black screen and he skip straight to pick 6 (that's the value i had) and said the kings picked me. After that it went to the contract screen. Going to Double check again but pretty sure that is the address.

Ok tested it out and this is what it is. You have to start off at 0 if you want to be picked First. The first time I did it I had value 6, but it actually picked me 7th to Kings, but I didn't notice that. So this time I had value 1 but I was picked 2nd. So just make sure to set the value 1 before the actually pick. So if you want to get picked 10th, put the value at 9. Also I froze the value before I started up MP mode. Have fun

Ok did more testing haha. Found out that you can get picked in the second round. So teams like Heat and Lakers that don't have a first round pick, you can get picked by them. Just keeping upping the value. The Heat pick first in the 2nd round or 31st overall, so I put in 30 for the value and they picked me. http://espn.go.com/nba/draft that's the list of draft order for both rounds if anyone needs it.

thank u so much bro, now I can go to TD Garden easily

Any chance someone can track down the rules addresses? Namely 3 in the paint and goaltending. I tried locking them down myself but seem to have no luck when trying to find them

This was posted over in the 2K forums:

Yup - been playing with the Tsearch engine for a bit and found several attributes related to gameplay, tendencies and such. I also discovered the numerical binaries associated with them. Here's what I have so far:

- Discovered a binary associated with the AI catch up logic or 'Rubberbanding AI' as some like to call it. Currently, the game defaults to percentages of 7%, 13%, 22% and 17% under a progression line (also notice it only takes prme numbers. Adding a non prime number causes the game to crash / freeze). Each number represent the quarters being played and the tangible change of the AI catching up. By looking at the line, you can see that by the 2nd half or 3rd quarter, the AI boost up all its bahaviors and tendencies from 7% - 22% (hence the term Progression). What's strange is that there is a STOP modifier associated with it, but for whatever reason(s) 2k / VC left it blank. Right now, I have to ALT Tab to force it to stop at 22%. The good news, is they can fix for 2k if they choose to correct / revise this.

There's no doubt the game handicaps you from the get-go. It was definitely intended to provide a challenge, but somehow it managed to become a frustratingly annoying issue as well.

Does anyone have the offsets used to control the "rubberbanding?"