Talk about NBA 2K12 here.
Sat Mar 17, 2012 4:19 pm
I noticed theredsuns on page 3 also got some of these, so credits to him too
Addresses to get 99 maximum possible rating (not limited to the set lower numbers game gives) for shooting guard,4 byte.
set them to 99, then go to your My-Player attributes and get it to 99 like you did the others.
There's actually some in-between and after if you need different ones for a different position (sg/pg,c,pf,sf), but I didn't need them so I didn't map out each addresses.. They're all basically together if you just go to the memory region
Shot Low Post - 01320079
Standing Dunk - 0132007C
Pass - 01320082
Defensive Clutch - 01320084
Defensive Low Post - 01320085
Block - 01320086
Offensive Rebounding - 0132008D
Defensive Rebounding - 0132008E
Strength - 01320096
My shooting guard still won't do a standing dunk, so not sure how useful it is. :p
Sun Mar 18, 2012 1:44 am
Oh wow Puff3r thank's a LOT! I started using Tsearch and with your file it works awesome.
I just have a couple of questions.
Is there anything in the game to make my player throw flashy passes more often? I have like 96 passing and 95 ball handling
I've noticed that when you crank up the values to 100 in shooting, not only me but my teammates are also like that, I know it is different 'User' and 'CPU', but since they are in my team and I'm kinda controlling them, does that make them 'User'?
Thanks
Great Job
Nba 2k12 was almost unplayable without this.
I had great games so far, because I like to set the sliders up for both CPU and User and have a competitive game.
Sun Mar 18, 2012 8:38 am
thanks!!!!!!
Sun Mar 18, 2012 9:55 am
franqito10 wrote:Oh wow Puff3r thank's a LOT! I started using Tsearch and with your file it works awesome.
I just have a couple of questions.
Is there anything in the game to make my player throw flashy passes more often? I have like 96 passing and 95 ball handling
I've noticed that when you crank up the values to 100 in shooting, not only me but my teammates are also like that, I know it is different 'User' and 'CPU', but since they are in my team and I'm kinda controlling them, does that make them 'User'?
Thanks
Great Job
Nba 2k12 was almost unplayable without this.
I had great games so far, because I like to set the sliders up for both CPU and User and have a competitive game.
Set Offensive Awareness to 100. Star PGs will now see the floor much better, throwing better and more often flashier passes.
Mon Mar 19, 2012 4:48 am
Would it be possible to increase the value of each basket (like making it worth 5 points instead of 2)?
Mon Mar 19, 2012 10:55 pm
someone can make a cheat engine update sliders pls
Tue Mar 20, 2012 10:27 am
This is incomplete but has some of the basic ability and success rate sliders for cheat engine. Please let me know if it works.
You do not have the required permissions to view the files attached to this post.
Tue Mar 20, 2012 11:22 am
Anyone have the post-patch address for player position?
Wed Mar 21, 2012 6:13 pm
can you post big picture?
Wed Mar 21, 2012 6:14 pm
where is sliders?
Thu Mar 22, 2012 4:30 pm
JM can you post video about NBA 2K12 My player No CPU Trade and Sliders?
or instruction
thanks for advance!
Thu Mar 22, 2012 4:32 pm
i have old my player, then i try this cheat doesn't work
i need to create new my player?
Fri Mar 23, 2012 11:27 am
Any help please? I really dont know where to enter the codes

i want to change my position from PG to SG. Please help...
Sat Mar 24, 2012 9:58 am
can some1 help me plz cheat engine not changing my values now
it worked before
Sun Mar 25, 2012 10:30 am
One question about these sliders, how am I supposed to put them into the file? Should I use 1 to represent 100, 0 to represent 0, and a decimal value in between(say, 40 for .40?) I used savantopus's sliders from earlier in the thread, and put the values as I just said, but nobody misses anything.
Edit: N/M, I think 0 is the halfway point!
Sun Mar 25, 2012 8:13 pm
saffir99b wrote:One question about these sliders, how am I supposed to put them into the file? Should I use 1 to represent 100, 0 to represent 0, and a decimal value in between(say, 40 for .40?) I used savantopus's sliders from earlier in the thread, and put the values as I just said, but nobody misses anything.
Edit: N/M, I think 0 is the halfway point!
Since you use savantopus slider, can you tell me your gameplay settings? He didn't list it. What are the gameplay settings, should it be real % or shot stick? Game speed? Clutch factor on? etc.
Sun Mar 25, 2012 11:32 pm
the only thing is that you in cheatengine you can open all the sliders at the same time, with tsearch i have to open one at the time :S
Mon Mar 26, 2012 1:20 am
Hi Guys,
This is my first contribution in any form, but I hope it's helpful.
After installing the patch(PC) I noticed all addresses changed(They normally do after a patch update), so I needed to remap the new addresses in my table.
I use CE and MHS(L. Spiro). I have posted my CT file for those having trouble after installing the newest patch from 2k.
There are three extra addresses added:-
a) My Player Skill Points = "SkiPoints"
b) My Player Money = "MoneyAdd"
c) Allow Trade(0 = Not Allow and 1 = Allow[affects the whole team in-season, not off-season])
Note: If your MP request a trade you will get traded if the team is willing to trade you). Why the My Player money? Simple, I wanted the Ray Allen shooting for shooting base and MJ shooting for the shooting form. I also wanted to have the MJ and Lebron dunk package, and for these you need more money.
After editing those I put the money back to the original amount, close CE and play the game. I don't use TSearch, so I can't answer any questions to that particular program.
You do not have the required permissions to view the files attached to this post.
Last edited by
quemajor on Mon Mar 26, 2012 5:36 am, edited 1 time in total.
Mon Mar 26, 2012 2:06 am
Thanks for all the hard work

what about the DRAFT address?
Mon Mar 26, 2012 10:50 am
free24ride1 wrote:saffir99b wrote:One question about these sliders, how am I supposed to put them into the file? Should I use 1 to represent 100, 0 to represent 0, and a decimal value in between(say, 40 for .40?) I used savantopus's sliders from earlier in the thread, and put the values as I just said, but nobody misses anything.
Edit: N/M, I think 0 is the halfway point!
Since you use savantopus slider, can you tell me your gameplay settings? He didn't list it. What are the gameplay settings, should it be real % or shot stick? Game speed? Clutch factor on? etc.
From his post:
Gameplay:
Difficulty- Pro (For now I use pro because I play with player lock turned on so that I only control one guy at a time for the whole game... which makes the game more difficult... this is realism. I have tried these sliders with All Star and the stats do change slightly... so be aware of a slight change and change them accordingly... but the general gameplay is the same... I will update a new slider settings specific to All Star soon in the future. .)
Game Style- Custom
Game Speed- 40 (Move this down from 50... its easier to control your guy and make better decisions with the ball)
Quarter Length- 12
Fatigue- On
Injuries- On
Clutch Factor- On
Shooting Type- Shot Stick Timing (I would prefer Real Player % but I found that even if you release perfect everytime, the player will miss more often when Real Player % is turned on. I have tried and tested this during the practice mode, analyzing the shot quality feedback. I think this is a glitch coming from 2k... has anyone else noticed this??)
FT Shooting Type- Real Player %
Free Throw Difficulty- 50
Although after a couple of games, I don't think these particular sliders might be all that for My Player. CPU seems too dominant, either that or it's because my team is the Warriors.
Mon Mar 26, 2012 11:19 pm
Anyone found out address or something to disable Goaltending? I get frustrated with my big man called goaltending so often...
Tue Mar 27, 2012 4:52 pm
quemajor wrote:Hi Guys,
This is my first contribution in any form, but I hope it's helpful.
After installing the patch(PC) I noticed all addresses changed(They normally do after a patch update), so I needed to remap the new addresses in my table.
I use CE and MHS(L. Spiro). I have posted my CT file for those having trouble after installing the newest patch from 2k.
There are three extra addresses added:-
a) My Player Skill Points = "SkiPoints"
b) My Player Money = "MoneyAdd"
c) Allow Trade(0 = Not Allow and 1 = Allow[affects the whole team in-season, not off-season]) Note: If your MP request a trade you will get traded if the team is willing to trade you). Why the My Player money? Simple, I wanted the Ray Allen shooting for shooting base and MJ shooting for the shooting form. I also wanted to have the MJ and Lebron dunk package, and for these you need more money.
After editing those I put the money back to the original amount, close CE and play the game. I don't use TSearch, so I can't answer any questions to that particular program.
i have old player and this work? or i create new my player to work this?
Tue Mar 27, 2012 9:55 pm
hey guys,,,
someone know how to edit the dominant hand for my player??
coz i really want to change my left dominant hand to right..
Tue Mar 27, 2012 10:22 pm
weskerdoomz wrote:quemajor wrote:Hi Guys,
This is my first contribution in any form, but I hope it's helpful.
After installing the patch(PC) I noticed all addresses changed(They normally do after a patch update), so I needed to remap the new addresses in my table.
I use CE and MHS(L. Spiro). I have posted my CT file for those having trouble after installing the newest patch from 2k.
There are three extra addresses added:-
a) My Player Skill Points = "SkiPoints"
b) My Player Money = "MoneyAdd"
c) Allow Trade(0 = Not Allow and 1 = Allow[affects the whole team in-season, not off-season]) Note: If your MP request a trade you will get traded if the team is willing to trade you). Why the My Player money? Simple, I wanted the Ray Allen shooting for shooting base and MJ shooting for the shooting form. I also wanted to have the MJ and Lebron dunk package, and for these you need more money.
After editing those I put the money back to the original amount, close CE and play the game. I don't use TSearch, so I can't answer any questions to that particular program.
i have old player and this work? or i create new my player to work this?
It should work, at least it did for me. However, I am always trying new things so creating a new player has never been an issue, but your old player should work.
Thu Mar 29, 2012 1:12 am
Has anyone been able to find the addresses for the tendencies? I've tested the Chinese trainer but it only changes the numbers, not the real tendencies. I mean I can change my player's tendencies in the player card but the numbers doesn't reflect his performance in the game. I got his shot tendency and shot inside tendency to 99 but he only shoots 6-10 shots a game. I tried simming it for about 10 games and same results, averaging 12 pts and 4.6 boards even with a 99 shot tendency.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.