NovU wrote:Which model do you own? Mine's ps3 slim 240gb. Having no prob with the new update so far.
PhatGeezer wrote:NovU, you're a fantasy bball hero to me and all but I don't know why whenever I see you post in this thread it reminds me of me checking my balls for bumps whenever I see those testicular cancer awareness ads on tv... Once I felt nothing unusual on it, I know everything will be fine...
NovU wrote:Which model do you own? Mine's ps3 slim 240gb. Having no prob with the new update so far.
shadowgrin wrote:Quick question: who is better in basketball, a black dude or a pinoy dude. If you thought or considered for a moment that it's the black dude then you're also a little bit racist.
End of any racist discussion.
Jeffx wrote: It's affecting PS3s with upgraded third-party HDDs, which is what I have.
I get a blackscreen and also stuck at the ribbon when the system first starts up... I cannot get to the XMB and the system just hangs. This is apparently happening to people who have a 750GB Hard Drive in their System or a 1TB. (People who have upgraded their hard drive through their own means) I have a 1TB hard drive in mine.
The firmware update v4.45 has reportedly been pulled (making v4.41 the current up to date firmware version), likely as a result of this glitch.
For those with bricked systems Tomorrow a patch should come out to fix this. All you need to do is download it to your USB drive and power up the PS3 in safe mode and install update from USB.
Step 1: Turn off the PLAYSTATION 3 by holding the Power button on the front of the unit till the Power light is red.
Step 2: Touch and hold the Power button, you will hear the first beep, meaning the PLAYSTATION 3 is powering on. Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset. Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off (Power light is red).
Step 3: Touch and hold the Power button, you will hear the first beep, again for the PLAYSTATION 3 to power on. Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset. Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, "Connect the controller using a USB cable and then press the PS button."
Users browsing this forum: No registered users and 13 guests