Custom sliders + Auto Playcalling for My player (Tsearch)

[lebrownage]

All Cpu tendency
take inside shot 5E194B4
take close shot 5E194BC
take mid shot 5E194C4
take 3 shot 5E194CC

[Hedonist]

Something strange happens to me.

These are my settings:
playvision 0
playvision display 1
playcall msg 0
off playcall 0
def playcall 1

For less than one quarter everything goes good, all messages appear clearly on the top bar: then, for the rest of the game, there is just a blank bar (even on offense or defense). This is not a big problem cause i can still see on floor the circles, the arrows and so on.. so i can move my player in the right way.

But it's quite curious.

Anyone in the same situation?

the messages are broken. in every mode

Hi, i got some matters i would like to comment:

First, i edited sliders in order to make MP mode much more realistic. I want a real challenge, I dont want to score 40 ppg or 15 rpg, I am a 2º roud rookie and i want my player sweat for each point or steal he gain, but all i seem to do is making rivals unstoppable and my teammates sucks and only uses one neuron to avoiding pissing thenselves in their pants in mid game.

I play as a scoring guard for NYK as a starter and I want to play with autoplays on but problems appear when we just use 3 or 4 basic lowpost plays and 80% of them finnish losing the ball or a pile of bricks created by Amare Studemire shooting everytime from allmost 3-point range....

- Can i edit NYK plays, or team tendencies, for example, use Lakers plays or something? What you guys advise me? Any ideas or tips will be appreciated.

Anyway, If anyone has find a challenging balance between sliders i ll like you to post yours to compare mines.

I m from Spain so sorry for my English if is not as understandable as intended.

So what did you change? Any suggestions?

As far as the playbook, I don't know if you can change it through TSearch or something like that. Easiest and most obvious fix is editing playbooks in the roster but then you'd still have to start all over.

[mi29ne]

does any one know the slider hex for the following:

1. free throw difficulty
2. User and CPU injury frequency
3. User and CPU injury severity
4. User and CPU fatigue rate
5. User and CPUclutch factor
6. User and CPUball handling
7. User and CPU take inside shots
8. User and CPU take close shots
9. User and CPU take mid-range shots
10. User and CPU take 3pt shots

I really appreciate it. tnx

[SPS]

Also user and cpu on ball steals and passing lanes.

[jk31]

Yaay the Code for Season Length does work in My Player Mode! Type in 0 or 1 (for 29/58 games), freeze it, create a new Player and enjoy less games!
I don't know if it works for an existing Player, but you could try to freeze the code at the end of a season.

[kirik123979]

I play as a scoring guard for NYK as a starter and I want to play with autoplays on but problems appear when we just use 3 or 4 basic lowpost plays and 80% of them finnish losing the ball or a pile of bricks created by Amare Studemire shooting everytime from allmost 3-point range....

Same thing for me. 1-2 plays and thats it. 99% of that plays become a contested shoot at the end. My CPU players dont care if they on double team or in bad position, they take shoot anyway.

Some times its looks terrible or even funny, 5-6 posessions in a row with same, stupid, dont working play.

[lak4cyut]

Hi Osori,
Thanks for your sharing!
I also release my cheat filter file!

This file is created by refer your information!

Thanks you again ~~
(Sorry, my English is not well enough.... ^^b)

Note,
My cheat tool is Cheat Engine, please use this application to open my attachment.
(Its edit view is bigger than TSearch... ^^b)

[aliceandcat]

Hi Osori,
Thanks for your sharing!
I also release my cheat filter file!

This file is created by refer your information!

Thanks you again ~~
(Sorry, my English is not well enough.... ^^b)

Note,
My cheat tool is Cheat Engine, please use this application to open my attachment.
(Its edit view is bigger than TSearch... ^^b)

What is the difference between this and Osori's version?

[Roie316]

Yaay the Code for Season Length does work in My Player Mode! Type in 0 or 1 (for 29/58 games), freeze it, create a new Player and enjoy less games!
I don't know if it works for an existing Player, but you could try to freeze the code at the end of a season.

It does work
you just need to freez it before you complete the summer circut

[lak4cyut]

To aliceandcat,
More configuration items, include all Game slide configuration.

You can try it.

[Tomas83]

Does anyone know how to change quarter length and simulated quarter length in My Player mode? On 2K10 I use tsearch and addresses were 5443ABC and 5443AC0, are they same for 2K11, or not? If not can you tell me the exact address?

[ironshinchan]

does anyone know how to change my player style (Athletic, all-around, etc) ??

Thanls

[grosko]

Hi men,
what is the slider of myplayer's free throw difficulty??
Why do they all wrong?

Thanks

[burter]

Not sure if this was posted yet on another thread, but here is the hex address for difficulty setting 551F694

The only reason why I even looked for it was because in MP for some reason it likes to reset your difficulty. Like if you go to play now than choose shoot around, it resets it back to PRO. It got annoying because I would start a game and I could kind of tell it wasn't on superstar mode after a quarter or 2. But I really didn't want to start the game over so I let it play through. Anyways just add this to your tsearch or cheat engine file and it will work. It resets on other things but too lazy to go through everything to figure out what resets it, besides the shoot around thing.

[Roie316]

Not sure if this was posted yet on another thread, but here is the hex address for difficulty setting 551F694

The only reason why I even looked for it was because in MP for some reason it likes to reset your difficulty. Like if you go to play now than choose shoot around, it resets it back to PRO. It got annoying because I would start a game and I could kind of tell it wasn't on superstar mode after a quarter or 2. But I really didn't want to start the game over so I let it play through. Anyways just add this to your tsearch or cheat engine file and it will work. It resets on other things but too lazy to go through everything to figure out what resets it, besides the shoot around thing.

You are my god!
I looked for that address alot of time.

does anyone knows what the hex address for game speed and free throw difficlty ?

[SkyLine03LT]

Does anyone know how to change quarter length and simulated quarter length in My Player mode? On 2K10 I use tsearch and addresses were 5443ABC and 5443AC0, are they same for 2K11, or not? If not can you tell me the exact address?

You don't need Tsearch to change that, just go to myplayer options

[MrMichcio23]

Does anyone know how to change my status in a team in My Player using Tsearch? I'm 95 overall SF and i'm "just" a starter. I wanna be a star

[Keen]

Does anyone know how to change my status in a team in My Player using Tsearch? I'm 95 overall SF and i'm "just" a starter. I wanna be a star

This is the way a do:

use the cheat My Player minutes (551F7C4, 4 bytes) and write the number of minutes you want to play. if you write 5 minutes, you ll be a bench player; 12, a roll player, 25....maybe if you write 45 minutes, you ll be a superstar.

[jk31]

Anybody who knows the Adress for the Length of the certain Playoff rounds?

[alfax123]

Player Model
05650056 (4 bytes)

Face on Player Card
05650038 (2 bytes)

[burter]

Anybody who knows the Adress for the Length of the certain Playoff rounds?

Still trying to figure this out, but having a hard time finding the address. If I do, I'll post it here.

[Roie316]

There's a problem on My Player that players who fouled out don't go to the bench and they keep playing, even though I froze it on cheat engine\Tsearch.
anyone knows how to fix it?

[jordanLoL]

There's a problem on My Player that players who fouled out don't go to the bench and they keep playing, even though I froze it on cheat engine\Tsearch.
anyone knows how to fix it?

2K will have to patch it. There's no other way to fix it I believe.

[Roie316]

There's a problem on My Player that players who fouled out don't go to the bench and they keep playing, even though I froze it on cheat engine\Tsearch.
anyone knows how to fix it?

2K will have to patch it. There's no other way to fix it I believe.

Yup.
Unfortunately, playing in My Player is that fun with all of those bugs, they need to fix alot of things.
oh well I guess I will move to association

[gabolifal]

I tried using both cheat engine and tsearch, bu I'm afraid I just don't know when exactly to freeze the line, ´cause still there's no playvision, anybody?