PS-PC converter problem

Anyone have any ideas...
I use a converter as i did in Live 2005, same one now.
But in 2006 the controller does not work. Can't control the players at all. *Only if i try with the keyboard and we all know that sucks.

what happens when you configure the controller, does is respond at all when you try to config a button?

For nba live 2004 en 05 i used a ps2 controller (cheap piranha controller 10 euros), connected to the printer port. I had to screw with it for ages to get it working for 06 again, but it works like a charm now.

Try configuring from the device manager as well.

If you too have a ps2 controller connected to the printer port (ltp) then you should be able to get it working.

what happens when you configure the controller, does is respond at all when you try to config a button?

That's what is strange. If i go to the configure menu I get to change the different buttons. But in game nothing works.

It is a dual analog pad for PS2 I use and it is connected to the USB on a stationary PC.
May it have anything to do with this not being a recomended controller fram EA?

well i ordered a ps2/usb converter off ebay, it better work wen i get it

Or you didn't select the right controller profile? Test...
Good luck

also, try selecting the 2nd controller (worked for me)

I've got a converter and a ps2 controller. Works just fine for me. I shit my self at first though, cos the anolog controls weren't working, but I realised I had to press the 'analog' button on the controller (the small little one in the middle, like the pause button), then the red light comes on. On a ps2 this is automatically on.

Also, config was a bit wack, so had to change some buttons around (pause/timeout back to front etc.)

hope that helps........

Thanks for all the help. Fixed my own setup and picked this one in-game.
Now everything works just fine

i use a an old dual analog non vibrating PS1 controller with a crappy old usb adapter i bought on ebay a few years ago for like $5. It has never let me down. It also fully supports 2 pads... which is sick.

I always have to configure the buttons in game though. But i keep a Logitech Dual action hanging around for button # reference.

Also, like the guy above said... make sure you have the analog button on.